Power Maxed

Steel Power Repair Epoxy Syringe

PM8265RS

In Stock

RRP £8.99

Heavy duty 28g two part epoxy syringe providing a strong 2500 psi bond for metal, ceramics, wood, fibreglass, plaster, brick and other demanding repairs.

Trade ordering

Case of 6 · Sold in multiples of 6

Product description

Power Maxed Steel Power Repair Epoxy Syringe 28g is a slow curing, high strength two part epoxy designed for strong, durable repairs. Its double syringe design accurately dispenses resin and hardener for consistent mixing and reliable results. With a 15 to 20 minute working time, it provides plenty of time for accurate positioning and application before reaching a functional cure in 30 minutes. Once fully cured, the epoxy delivers a strong 2500 psi bond with a clear finish. Suitable for metal, ceramics, wood, fibreglass, plaster and brick, it is ideal for automotive repairs, casting fills, industrial work and general DIY applications.

Key benefits

High strength 2500 psi bond
Heavy duty two part epoxy adhesive
15 to 20 minute working time for accurate application
30 minute functional cure
Full cure in 12 hours
Strong and long lasting bond
Bonds metal, ceramics, wood, fibreglass, plaster and brick
Double syringe provides accurate resin and hardener mixing
Clear cured finish
Suitable for automotive, industrial and DIY repairs

Features

28g two part epoxy
Double syringe applicator
2500 psi strength rating
15 to 20 minute working time
12 hour full cure
Application temperature range from +5°C to +35°C
Service temperature range from -20°C to +70°C
Slow curing high strength formulation

Suitable for

Metal bonding
Ceramic bonding
Wood bonding
Fibreglass bonding
Plaster repairs
Brick repairs
Automotive repairs
Casting fills
Industrial repairs
DIY repairs
High strength bonding applications

How to use

Prepare the surfaces to be bonded so they are clean and ready for application. Dispense the resin and hardener from the double syringe and mix thoroughly. Apply the mixed epoxy within the 15 to 20 minute working time and position the components as required. Allow approximately 30 minutes for a functional cure and 12 hours for a full cure. Apply at temperatures between +5°C and +35°C.